How to determine if power failure affects a luminaire

If a luminaire changes its status for no apparent reason, it may be due to a power failure. A simple way to check this is:

- Set one or two nodes with "Startup state for power on" as "Default mode"

- Modify the "Default mode" to an specific status. For example, an unusual value of dim level in combination (if possible) with specific RGB colour or CCT.

With the "Defaul mode" configured as such, it will be easy to determine if there was a power failure. If the node (or nodes) manifest the configuration made for "Default mode", then we can determine that the power failure was the cause.