The DCS DALI Gateway profile (ID 9000) acts as a gateway between a wired DALI network and a wireless Casambi network. This allows control over the Casambi devices within the network through a DALI master:
For more information: https://support.casambi.com/support/solutions/articles/12000074044-dali-gateway
However, it does not allow to activate Casambi scenes from the DALI system.
The DCS DALI Gateway [scene control] (ID 30306) allows what ID 9000 does not: activate Casambi scenes from DALI system. The limit is 16 scenes.
The configuration must be done in both sides:
- Create the necessary scenes on Casambi side and configure them on the DCS DALI Gateway. Example:
- Address the devices on DALI software and match the scenes (if needed).
This profile also allows using a physical or logical push-button on the DCS DALI Gateway device, which will allow its usage as if it was a Casambi push button. Example:
The limit is 8 scenes.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article